Pure Titanium Square Wire

Titanium: Balance
Iron: 0.20 max
Oxygen: 0.18 max
Carbon: 0.08 max
Nitrogen: 0.03 max
Hydrogen: 0.015 max
Residuals each 0.10 max, total 0.40 max

Send Inquiry

Product Introduction

The common specifications for pure titanium square wires range from φ0.8 to φ20.0mm (side length approximately 0.8-6.0mm), primarily used in industrial fastener manufacturing, welding wires, and corrosion-resistant components. ‌

Specifications
The edge length of pure titanium square wire typically ranges from 0.8 to 20.0 mm, with specific specifications adjustable based on application scenarios. For instance, titanium welding wire commonly uses a 3.2 mm specification, while chemical filtration mesh weaving often employs 2.5-3.2 mm specifications. ‌

Physical Properties

Density, 0.163 lbs/in³, 4.51 g/cm³

Mean Coefficient of Thermal Expansion, in/in/°F (mm/m/°C):
70-212°F (20-100°C): 4.78 x 10 (8.6)

Thermal Conductivity: BTU-in/h-ft-°F (W/m-°K):
At 70°F (21°C): 111 (16)

Modulus of Elasticity, KSI (MPa)
15.2 x 10³ (105 x 10³) in tension

Melting Range: 3040°F (1670°C)

Primary use
Industrial Fasteners: Titanium square wire is commonly used for manufacturing fasteners, load-bearing components, and valve compression springs, featuring corrosion resistance and high strength. ‌
Wire Application: Over 80% of titanium wire is used in welding scenarios, such as the repair of aerospace engine components. ‌
Corrosion-resistant scenarios: Used as filter screens or electrode materials in the chemical and pharmaceutical industries.