Precision Ground Titanium Rod

TA1 (Grade 1)

TA1 (Grade 1) is a pure Precision Ground Titanium Rod with high ductility and corrosion resistance, suitable for medical implants and chemical equipment.

TA2 (Grade 2)

TA2 (Grade 2) Precision Ground Titanium Rod has increased its strength by 20%, making it the preferred choice for industrial scenarios such as power generation and seawater desalination.

TC4

(Grade 5, Ti-6Al-4V)

TC4 (Grade 5, Ti-6Al-4V) Precision Ground Titanium Rod is strengthened through heat treatment and has a strength of over 900MPa. It is the core material for aviation engine components and marine equipment.

TC11

(Ti-6.5Al-3.5Mo-1.5Zr-0.3Si)

TC11 (Ti-6.5Al-3.5Mo-1.5Zr-0.3Si) is designed for high temperature (500 ℃ long-term stability) and is used for key components such as compressor blades. Its α - β phase structure ensures reliability under short-term conditions at 700 ℃.

TA10 (Gr.12)

TA10 (Gr.12)Precision Ground Titanium Rod :The tensile strength  ≥ 485MPa, and the elongation is>18%
Excellent corrosion resistance (especially crack corrosion resistance), working temperature range: -253 ℃~600 ℃
Often used as fuel storage tanks for spacecraft, seawater pipelines for ships, and medical implants.

TA15

(Ti-6.5Al-1Mo-1V-2Zr)‌

The room temperature tensile strength of TA15 Precision Ground Titanium Rod is 900-1100MPa, with an elongation rate of ≥ 8%. It can work stably for 3000 hours at 500 ℃ and has an instantaneous temperature resistance of 800 ℃. The strength retention rate after welding is ≥ 90%, and no heat treatment is required. The service life of 450 ℃ reaches 6000 hours. Mainly used in aerospace engine components and high-temperature load-bearing structures.

TC21

(Ti-5.5Al-3.5Sn-3Zr-0.4Mo-0.7Nb)

TC21(Ti-5.5Al-3.5Sn-3Zr-0.4Mo-0.7Nb) Precision Ground Titanium Rod has a specific strength of 300MPa · cm ³/g, a fracture toughness KIC ≥ 80MPa · m ¹/², and outstanding fatigue resistance (cycle life>10 ⁷ times). It is commonly used in fighter aircraft fuselage load-bearing frames and deep-sea detector pressure shells.

Ti-3Al-2.5V

(Gr.12)

Ti-3Al-2.5V (Gr.12) Precision Ground Titanium Rod has a tensile strength of 550-700MPa, excellent low-temperature toughness (-196 ℃ impact energy>50J), and better cold forming performance than GR5. Commonly used in liquid hydrogen storage tank pipelines and nuclear power plant heat exchangers.