Grade 12 Titanium Ultra Fine Wire

We specialize in the spot supply and customized production of Grade 12 (UNS R53400) ultra-fine filaments. This grade corresponds to the national standard TA10, with a chemical composition of 0.3% molybdenum and 0.8% nickel. Industrial pure titanium based Ti-6Al-4V is a titanium alloy with good corrosion resistance. The exposition of Grade 12's core value is its resistance to crevice corrosion is far superior to Grade 2 in high temperature salt water, chlorides and weak reducing acids and it is much less costly than Grade 7 which contains palladium. It is the best performance and economic material for chemical, marine engineering, welding etc.

Available diameter stock: 0.2 mm,0.3mm,0.5mm,0.8mm,1.0mm,1.2mm,1.6mm,2.0mm,2.4mm,3.0mm,3.2mm. Ultra fine wire (<0.5mm) is available in fixed length straight wire and precision winding.

1, An economical solution to resist crevice corrosion. Grade 12 is designed specifically for high-temperature saltwater and chloride environments. The synergistic effect of nickel and molybdenum ions changes the surface electrochemical state inside the gap, making its resistance to gap corrosion close to Grade 7, but the price is significantly reduced due to the absence of palladium, making it the most cost-effective titanium alloy choice under chloride conditions.

2, The welding performance is highly matched with the base metal. ERTi-12 welding wire is used to obtain weld deposits of Grade 12 composition which exhibit good corrosion resistance and mechanical properties matching those of the base metal.

3, High temperature strength is superior to pure titanium. Grade 12 has a higher upper temperature limit than Grade 2 and Grade 3. Pure titanium is subject to pitting and crevice corrosion above 200 ° C in chlorine containing environments, while Grade 12 is stable at high temperatures in the presence of salt, and is used in heat exchangers and evaporators.

4, The precision of ultra-fine wire processing is controllable. The 0.1mm grade ultra-fine wire has extremely high requirements for molds, lubrication, and annealing processes. The cold processing performance of Grade 12 is close to that of pure titanium. Through multiple precision drawing and intermediate annealing processes, it can stably produce ultra-fine wires with no scratches on the surface and good dimensional consistency, meeting the requirements of precision springs and micro welding.

1, Ultra fine wire customization: maximum size response starting from 0.1mm. On the market, most conventional titanium wire suppliers start from 0.5mm. We rely on precision drawing equipment and our own annealing process to extend the customizable lower limit of Grade 12 to 0.1mm. Customers can specify the diameter, tolerance level, surface condition (pickling/gloss), and supply form (straight wire/winding/wire shaft). Each batch of retained samples is traceable and supports third-party retesting. For R&D sampling, we offer a small batch customization channel with a minimum order weight of 1kg, significantly reducing your trial and error costs.

2, Performance state customization: annealed state, cold working state, and welding wire state in parallel. The same brand has completely different requirements for different purposes: spring wire needs to be strengthened by cold work, welding wire needs to be softened by annealing, and hanging wire needs to balance strength and conductivity. We can flexibly switch between annealed state (M), cold worked state (Y), and hot worked state (R) according to your end use, and adjust the drawing reduction rate to match the target tensile strength. You don't need to process it yourself, and it can be put into production upon arrival.

3, Packaging and delivery customization: a flexible solution that meets the needs of foreign trade and production lines. We understand the strictness of packaging labeling, pallet specifications, and delivery times in foreign trade orders. Supports various packaging forms such as DIN spools, plastic drums, and fixed length straight wire bundling. Labels can be labeled with brand, furnace number, size, and standard number according to customer requirements. Regular spot diameter delivery within 7 days, customized size delivery within 15-20 days, and EN 10204 3.1 certificate provided with the goods.

Q1: Can you produce according to the non-standard diameter I requested? How to control the tolerance?
Okay. In addition to the standard specifications, we support customization of any diameter within the range of 0.1mm to 7.0mm. The tolerance strictly follows the ASTM B863 grading system: up to ± 0.025mm for sizes below 0.5mm and ± 0.08mm for sizes below 1.0mm. Each roll comes with a record of the measured diameter and supports third-party re inspection.

Q2: What is the minimum order quantity for customized ultra-fine wires? How long is the sampling cycle?
The minimum order weight for regular customization is 5kg, and for R&D sampling, it can be as low as 1kg. The sampling cycle is usually 7-10 days, and for bulk orders, it takes 15-20 days. The sampling fee can be negotiated and deducted in subsequent bulk orders, and the specific details shall be subject to the contract.

Q3: Can I customize if the state I need is not the regular annealed state?
Okay. We provide three tailored states including annealed (M), cold worked (Y), hot worked (R), and you can also define the tensile strength or elongation index range. Specify your end use (spring/welding/hanging tool) when ordering and we'll suggest compatible drawing processes and heat treatment systems.

Q4 How to do if quality problem happened for customized products ? How to guarantee after sales service?
All customized batches will keep samples for 12 months. If the re examination confirms the size or performance doesn't meet the requirements, it will be redi-checked for free or the fee should be refunded. Every batch of goods is accompanied with material cert and test data, and enable third party re-test such as SGS and BV. Reply for dispute resolution/technical staff will consult and confirm within 48 hours.

Q5: Could you please cooperate with my foreign trade customers for third party inspection & special marking?
Support. We can work with SGS/BV/Intertek and other institutions for inspection, and labels can be tailored to meet your needs (include brand, furnace no, size, net weight, place of origin). Packaging: Fumigated wooden box or non fumigation pallet and stenciling should be done according to the content provided by the buyer.

Request a Quote

Email：bjcxtitanium@gmail.com       

               cxtitanium@outlook.com

Whatsapp：+8613571718779

Hot Tags: grade 12 titanium ultra fine wire, China grade 12 titanium ultra fine wire manufacturers, suppliers, factory