Titanium Superfine Wire

Our Titanium Superfine Wire strictly follows ASTM international standards, covering pure titanium and alloy series grades, focusing on the production of 0.01-0.5mm ultra-fine specifications. The product combines ultimate precision size control, excellent ductility, and biocompatibility, and is widely used in high-end fields such as microelectronics, precision medicine, aerospace micro components, etc. As a source manufacturer, we take full specification spot reserves, factory direct supply low price strategy, and flexible customization capabilities as our core advantages, providing global customers with cost-effective ultra-fine titanium wire solutions, breaking the industry pain point of "high price shortage" for ultra-fine specifications.

Titanium ultrafine wires have irreplaceable application value due to their unique specifications and material characteristics. About Pure titanium Vaterite grade (ASTM F67 Gr1/Gr2) has extremely good plasticity, and it is able to be stretched into 0.01mm without crack. It is easy to produce high-density oxide film on the surface and resistant to corrosion by body fluid and chemical media; and (2) alloy grade (ASTM F136 Gr5ELI) having excellent strength and biocompatibility suitable for load bearing precision components.Compared to conventional titanium wire, its dimensional accuracy reaches ± 0.002mm, which can meet the assembly requirements of microstructures. We have achieved a price reduction of 18% -25% compared to the industry average for ultrafine specification titanium wire through large-scale production and supply chain optimization, while ensuring spot supply and balancing cost-effectiveness and delivery efficiency.

1. Microelectronics field: Suitable for sensors, micro switches and other components, using ASTM F67 Gr1 titanium ultrafine wire with a diameter range of 0.01mm-0.1mm, dimensional tolerance ± 0.002mm, surface roughness Ra ≤ 0.05 μ m, ensuring signal transmission stability and structural adaptability. It can be customized into ultrafine springs or conductive wires.

2. Precision medical: for micro implants and ophthalmic surgical instruments, ASTM F136 Gr5ELI (0.05mm-0.2mm) and ASTM F67 Gr2 (0.08mm-0.3mm) are most suitable.The former ensures mechanical stability after implantation, while the latter is suitable for disposable precision instruments and supports end rounding to avoid tissue damage.

3. Aerospace field: For micro connectors and lightweight springs, ASTM F67 Gr2/Gr1 titanium wire with a diameter of 0.1mm-0.5mm is used, with a straightness of ≤ 0.3mm/m, high and low temperature cycling resistance, and can be customized into specific spiral structures to meet the lightweight requirements of aviation components.

We have exclusive ultra-fine titanium wire precision manufacturing technology, equipped with imported micro drawing equipment and clean room production environment. We adopt a multi pass progressive drawing process, combined with a precise tension control system, to stably produce 0.01mm ultra-fine wires, avoiding problems such as wire breakage and diameter deviation during the drawing process. The raw material is 99.99% high-purity sponge titanium, which is melted by double vacuum arc melting. The impurities such as oxygen and iron are strictly controlled to ensure the ductility and corrosion resistance of the product. Each batch is analyzed by spectroscopy and laser diameter testing, and the quality can be traced.

Relying on large-scale production and vertical supply chain integration, we achieve precise cost control, with factory direct supply prices 18% -25% lower than similar products in the industry. At the same time, we reserve 16+mainstream ultra-fine specifications in stock (0.01mm, 0.05mm, 0.1mm, etc.), with a total inventory of over 2 tons. Spot orders can be packaged and delivered within 2 working days, and urgent orders can be prioritized for production, greatly reducing customer procurement cycles. For niche specifications, we can quickly respond to customized needs without the need for high minimum order quantities, balancing small batch purchases with cost-effectiveness.

We have established a professional ultra-fine titanium wire technology service team with over 10 years of experience in the industry. We can provide customized solutions based on customer application scenarios, not only adjusting diameter, length, and surface treatment methods, but also optimizing annealing processes to match different assembly and processing needs. Equipped with a complete set of testing equipment, 100% full process inspection is carried out from raw materials to finished products to ensure that every roll of titanium wire meets ASTM standards and customer requirements.

1. Full dimensional customization capability to meet ultrafine requirements: We provide customized services covering multiple grades and specifications, with diameters ranging from 0.01mm-0.8mm and a minimum of 0.008mm. We support length cutting (0.5m-1000m/roll), surface treatment (electropolishing, bright annealing, hydrophilic coating), and end processing (rounding, chamfering). For special scenarios, alloy composition can be fine tuned or mechanical properties can be optimized, such as improving the ductility of Gr5ELI grades to adapt to micro bending processing. The technical team will deeply connect with customers, provide sample testing and performance verification, ensure that customized products accurately match application requirements, have no minimum order quantity limit, and can also enjoy factory prices for small batch customization.

2. Dual advantages of low price in stock to ensure delivery: We reserve a full range of mainstream ultra-fine specifications in stock, covering the three core grades of ASTM F67 Gr1/Gr2 and ASTM F136 Gr5ELI. Regular orders do not need to wait for production and can be shipped within 2 working days. Urgent logistics can be coordinated in remote areas. As the source manufacturer, we eliminate intermediate distribution links and reduce costs through large-scale production. The spot price starts at 150 yuan/kg, and bulk purchases can enjoy additional discounts. At the same time, we provide inventory warning and reservation services for long-term cooperative customers to avoid the risk of stockouts or price increases caused by market fluctuations.

3. Complete after-sale service and technical support: We provide the full-cycle after-sales service, and each batch of products is accompanied with the MTR (material testing report). The warranty duration 2 years. If processing failures occur due to product quality issues, unconditional returns and exchanges can be made and logistics costs can be borne. Due to the challenges in processing ultra-fine wires, the technical team is ready to respond to inquiries within 24 hours, providing secondary processing solution after wire drawing (welding, bending, cutting, etc),and can also optimize product parameters according to customer advices. Regulartracked the useof customer, collected suggestions for improvement, to keep the product and services better.

1.What are the dimensional tolerances and the delivery cycles for customizing ultrafine titanium wire?

Chenxin Titanium:The diameter tolerances of under 0.1 mm are controlled at ±0.002 mm and the tolerances of the diameter ≥0.1 mm are controlled at ±0.003 mm. Normal customized samples are shipped in 3-5 working days, quantity orders are completed in 7-10 working days, urgent order can be compressed to 3-5working days.

2.Is the quality of spot goods consistent with that of customized products?

Chenxin Titanium:Completely consistent. Both spot and customized products use the same raw materials and production processes, follow the same set of quality testing standards, and have passed ASTM certification and full performance testing. They come with complete testing reports, and only differ in specifications and processing requirements, with no difference in quality. You can purchase with confidence.

3. Could you give me some advice on titanium wire ultra-fine processing technology?

Chenxin Titanium:Okay. We provide exclusive processing guide basing on customized spacs, said by bending, welding, cutting, etc. Our technical team can also offer you remote support and on site service if needed, to help solving problems like wire breakage and deformation while processing extremely fine wire.

Email：bjcxtitanium@gmail.com       

               cxtitanium@outlook.com

Whatsapp：+8613571718779

Hot Tags: titanium superfine wire, China titanium superfine wire manufacturers, suppliers, factory