The production process of high tensile and corrosion-resistant titanium flat wire is characterized by,
Including the following steps:
(1) Busbar selection: Select the diameter of the titanium base material round wire based on the width of the finished flat wire;
(2) First level rolling: After the busbar is removed from the pay off group, it enters the finishing mill A for first level rolling;
(3) Secondary rolling: The busbar after primary rolling is introduced into the tension adjustment structure A for tension adjustment, and then enters the finishing mill B for secondary rolling;
(4) Third level rolling: The busbar after the second level rolling is introduced into the tension adjustment structure B for tension adjustment, and then enters the finishing mill C for third level rolling;
(5) Fourth level rolling: The busbar after third level rolling is introduced into the tension adjustment structure C for tension adjustment, and then enters the finishing mill D for fourth level rolling;
(6) Cleaning and drying: After four stages of rolling, the flat wire comes out of the finishing mill D and enters the cleaning box and drying box for cleaning and drying in sequence;
(7) Roll up packaging: After drying, the flat wire is rolled up and packaged by a winding group to obtain a high tensile and corrosion-resistant titanium flat wire.
Request a Quote
Email：bjcxtitanium@gmail.com
Whatsapp：+8613571718779
