Titanium Orthodontic Wire
High elasticity and good rebound, suitable for orthodontic force control
Smooth surface, low friction and easy to clean in oral cavity
High dimensional precision, stable performance and batch consistency
Corrosion-resistant, durable and suitable for long-term oral use
Titanium Orthodontic Wire is a high-precision medical titanium alloy wire designed specifically for orthodontic clinical practice. It relies on the two core grades of ASTM F67 (pure titanium) and ASTM F136 (titanium alloy), focusing on the low modulus, high rebound, and high biocompatibility requirements of orthodontics. Unlike ordinary medical titanium wire and stainless steel orthodontic wire, it focuses on the three advantages of light force correction, low sensitization, and long-lasting stability. It is the preferred material for modern orthodontics, especially for nickel allergy patients, adult aesthetic orthodontics, and complex dental deformities. As a source manufacturer, we specialize in precision drawing and customized molding of orthodontic titanium materials, achieving full coverage from 0.10mm ultra-fine round wire to 0.40mm square wire. We support customized arch shapes, surface coatings, and mechanical parameters, providing compliant, stable, and highly adaptable orthodontic titanium wire solutions for global orthodontic instrument manufacturers and dental clinics.
1, Core brand characteristics (American standard)
ASTM F67 Grade 2 (pure titanium, CP Ti): purity 99.9%, elastic modulus of about 75GPa (only half of stainless steel), flexible, easy to bend, low allergenic, suitable for early alignment, child orthodontics, and nickel allergy populations.
ASTM F136 Grade 23 (Ti-6Al-4V ELI, titanium alloy): Low gap element, high strength (tensile strength ≥ 860MPa), good rebound, fatigue resistance, suitable for mid-term leveling, gap closure, torque control, and complex cases.
ASTM F1295 Ti-6Al-7Nb (titanium niobium alloy): Nickel free and vanadium free, with optimal biocompatibility, suitable for long-term implantation, high-sensitivity patients, and high-end aesthetic orthodontics.
2,Size brand application parameter table
| ASTM Grade | Alloy | Diameter(Round) | Cross-Section(Rect) | Tolerance | Surface | Key Application |
|---|---|---|---|---|---|---|
| F67 Gr2 | CP-Ti | 0.10–0.20mm | - | ±0.005mm | Bright/Polished | Initial alignment, pediatric |
| F136 Gr23 | Ti-6Al-4V ELI | 0.20–0.30mm | 0.017×0.025" | ±0.005mm | Polished | Leveling, space closure |
| F1295 | Ti-6Al-7Nb | 0.30–0.40mm | 0.019×0.025" | ±0.008mm | Electropolished | Finishing, torque control, hypersensitive |
3, Application scenarios and corresponding parameters
Initial alignment (0.10-0.20mm, ASTM F67 Gr2): Soft and elastic, light force (50-150g), low friction, reduces pain, suitable for initial alignment of crowded or twisted teeth.
Mid stage leveling/gap closure (0.20-0.30mm, ASTM F136 Gr23): Balancing strength and rebound, capable of bending complex curves, continuously releasing stabilizing force, leveling dental arches, and closing extraction gaps.
Fine adjustment/torque control in the later stage (0.30-0.40mm square wire, ASTM F1295): high stiffness, low sensitization, ultra smooth surface, precise control of tooth torque and bite, suitable for adult aesthetic orthodontic and high-sensitivity patients.
4, Manufacturer's core advantages (different from ordinary titanium wire)
Orthodontic grade specialized process: produced in a 100000 level clean room, with multiple ultra precision drawing and low-temperature annealing processes to ensure low rebound drift, no scratches on the surface, high dimensional consistency, and less susceptibility to plaque attachment in the oral cavity.
National Standard Compliance: Strictly following ASTM F67/F136/F1295, with MTR, furnace number traceability, ISO10993 biocompatibility report, supporting FDA/CE/NMPA certification.
Strong customization ability: supports diameter/square size customization, arch customization (Ovoid/D-type/anti curve), surface coating customization (hydrophilic/antibacterial/low friction), and fine tuning of mechanical parameters.
5, Why choose us
Orthodontic exclusive deep customization, suitable for all clinical scenarios: We specialize in orthodontic titanium wire customization, breaking through the standardization limitations of general titanium wires. We can accurately adjust the diameter (0.10-0.40mm), square wire cross-section, arch curvature, and mechanical parameters according to customer needs, and adapt to different bracket systems and dental deformities. Support customized surface electropolishing, antibacterial coating, and low friction coating to reduce the risk of oral friction and infection. No minimum order quantity limit, small batch samples can be delivered within 5 days, and bulk orders can be delivered within 10-15 days. We can provide free bow design and parameter optimization solutions to help customers quickly launch differentiated orthodontic products.
Medical grade compliance customization, fully assisting in certification overseas: As an ISO13485 certified manufacturer, our customization services fully comply with American and international medical compliance requirements. Each batch of products provides complete ASTM standard compliance reports, biocompatibility reports, mechanical performance reports, and traceability documents. The after-sales team can assist customers in organizing FDA/CE/NMPA certification materials, answering material compliance questions related to orthodontic titanium wires, and avoiding delays in certification progress due to incomplete materials. We can provide bilingual reports in both Chinese and English to meet the global market registration needs and significantly shorten the customer's product export cycle.
Email：bjcxtitanium@gmail.com
Whatsapp：+8613571718779
Hot Tags: titanium orthodontic wire, China titanium orthodontic wire manufacturers, suppliers, factory
Previous
No InformationYou Might Also Like
Send Inquiry